www.ets-lindgren.com
HI-4413USB Fiber Optic to USB Converter
Quick Start Guide
3. Connect Components
Connect the fiber optic cable from
the fiber optic ports on the probe
to the HI-4413USB, matching
white to white and
yellow to yellow as indicated
by the markers on the probe,
modem, and cable.
•
Computer
Probe
Plug the HI-4413USB into
the USB port on the computer
(communication port 1, 2, 3, 4, or 5).
•
Turn on the probe.
•
Start ProbeView. Click
,
,
,
,
and then click
.
Start All Programs Holaday ProbeView
ProbeView
•
The first time ProbeView is launched an option box displays to allow selection
of a communication port. Select the port number where the HI-4413USB
is connected.
To choose a different port after the initial selection, select the
menu
after ProbeView starts. For more information, see the ProbeView user manual.
Communications
•
ProbeView will look for a probe until one is detected, and then perform testing
to determine the type of probe that is connected.
If the HI-4413USB is connected to the selected communication port, the LEDs
on the HI-4413USB will flash. Only one flashing LED indicates the communication port
is working correctly but the connected probe is not responding.
•
Before connecting components or performing maintenance, read
on the back page of this document.
Safety Information
For complete information on using ProbeView, see the ProbeView user manual.
For complete information on using probes, see the probe user manual.
ProbeView II
ProbeView LT
Insert the ProbeView II CD
into the CD drive on your computer.
•
Click Setup.exe located on the CD.
ProbeView II installs in
C:\Program Files\ProbeView II.
•
Download ProbeView LT software
from
. Point to
, click
,
and then click
.
Follow the instructions to download.
www.ets-lindgren.com
Resources
Software/Firmware
ProbeView LT
•
To begin the installation program
click Setup.exe. ProbeView LT installs
in C:\Program Files\ProbeView LT.
•
2. Install ProbeView II –OR– ProbeView LT
1. Download & Install Driver for HI-4413USB
The USB driver for the HI-4413USB automatically downloads and installs when the HI-4413USB
is plugged into a computer that is connected to the Internet and that is installed with one of
the following supported Microsoft
Windows
operating systems: Windows XP,
Windows Vista® Client, Windows Vista Client x64,Windows 7 Client, or Windows 7 Client x64.
If you use an operating system not listed, please contact ETS-Lindgren.
If your computer is not connected to the Internet, or it is connected but the automatic
installation failed or was cancelled, you will need to download the drivers from
and manually install them on your computer
®
®
.
www.ets-lindgren.com
Go to
.
www.ets-lindgren.com
•
On the
menu, click
.
Resources
Software/Firmware
•
In the
column, click
(the name of the zip file
may vary slightly). Save the zip file to the desired location on your computer.
Software
USB Virtual Comm Port Driver
•
In the same section on the ETS-Lindgren website where the driver is located,
click the link to download the installation instructions. Follow those instructions
to install the USB driver on your computer.
•
Extract the files from the downloaded zip file.
•
