ETS-Lindgren HI-3627, User Manual

Page: 17 / 39

ets-lindgren.com Operation 17
4.0 Operation
CAUTION: Before placing into operation, follow the safety
information in the ETS-Lindgren
Product Information
Bulletin
included with your shipment.
Quick Start
Step 1. Plug sensor into multi-pin connector at top end of the meter.
Step 2. Turn the meter on by rotating the range selector switch one
position clockwise. Note: the battery low LED will flash
momentarily as the meter is turned on.
Step 3. Verify that the over range LED and the battery LED are not
illuminated.
Step 4. Make measurements with the range selector switch set for
the maximum reading without an over range indication.
Controls, Indicators, and Connectors
The HI-3627 is housed in a rugged aluminum case with a detachable
probe. The unit is shipped in a convenient carrying case with foam
cutouts which accommodate the meter, probe and the optional
accessories offered with the meter.