ETS-Lindgren BiConiLog 3149, User Manual, Page: 18 / 33

18
|
Mounting Instructions
1.
Located on the bottom
of the polarizing adapter
is a 7/8–14 thread
receptacle; if you need
to convert to a
1/4–20 receptacle, insert
the 1/4–20 thread insert
into the polarizing
adapter.
2.
Attach the polarizing
adapter to tripod or
tower.
Do not cross thread or permanent damage to the adapter and
thread insert could occur.
3.
Remove the mounting knob from the mounting bracket on the antenna.
4.
Slide the mounting bracket onto the polarizing adapter with the polarizing
adapter placed between the shoulders of the mounting bracket.
5.
Thread the mounting knob through the mounting bracket, then through the
polarizing adapter, and finally through the hex nut.
6.
Tighten the mounting knob to secure the antenna.