ETS-Lindgren 8100-007, User Manual

Page: 22 / 44

22
Operation www.ets-lindgren.com
The third page of the user menu is the elapsed time meter screen (Screen E).

This screen shows the overall amount of time that the amplifier has
been in operation mode (OPERATE) and the amount of RF switch on
cycles. The display format is “Total Hours:Minutes:Seconds (Cycles)”.

You can change between the elapsed time meter for “Mains on”, the
elapsed time meter for “OPERATE” and (if applicable) the elapsed time
meters for “OPERATE in each frequency band” by pushing the right
button or the left button (to step back).

Exit the elapsed time meter page by pushing the left and the right
button simultaneously for at least one second.
The fourth screen of the user menu is the GPIB/IEEE address screen
(Screen G).

This screen allows viewing and changing of the current GPIB/IEEE
address of the amplifier.

The address is changed via clicking the left or right button.

The address ranges from 01 to 31 and the default address is 07.

Exit the GPIB/IEEE address page by pushing the left and the right
button simultaneously for at least one second.
After exiting the fourth user menu page the amplifier will show the main
screen (Screen M) again.