background image

ii 

|

 

ETS-Lindgren L.P. reserves the right to make changes to any product described 
herein in order to improve function, design, or for any other reason. Nothing 
contained herein shall constitute ETS-Lindgren L.P. assuming any liability 
whatsoever arising out of the application or use of any product or circuit 
described herein. ETS-Lindgren L.P. does not convey any license under its 
patent rights or the rights of others. 

© Copyright 2009–2010 by ETS-Lindgren L.P. All Rights Reserved. No part of 
this document may be copied by any means without written permission from 
ETS-Lindgren L.P. 

Trademarks used in this document: The 

ETS-Lindgren

 logo is a trademark of 

ETS-Lindgren L.P. 

Revision Record 

MANUAL,3181 3183 3184 MINI-BICON ANTENNA   |   Part #399821, Rev. D 

Revision 

Description 

Date 

A Initial 

Release 

October, 

2009 

Updated data charts in 

Typical Data

; updated 

Mounting Instructions 

November, 2009 

Updated 3183 illustrations; added 
note about 3183 stem; updated 

Physical Specifications 

February, 2010 

Updated 3183 photos; updated 
3183 data 

March, 2010 

 

Summary of Contents for 3181








































































Reviews: