Mounting Instructions
|
11
4.0 Mounting Instructions
Before connecting any components, follow the
safety information in the ETS-Lindgren
Product Information Bulletin
included with your
shipment.
Do not cross thread connections or permanent damage could occur.
Mounting the Balun and Polarization Unit
Due to the size of the Model 3159C biconical elements, you must
mount the balun unit onto the pedestal prior to attaching the elements.
1.
Align mounting channels to pedestal and fasten with stud and nuts to mounting plates at desired mounting
height. Use included phenolic bolts and nuts and tighten to 8ft-lbs (10.8Nm) torque
2.
Align mounting holes on Polarization unit with top slotted holes on top slotted holes
3.
Align balun to mounting channels and insert through bolts from behind balun rear plate, secure with lock
washer, and hex nut.
Insert spacer between polarizer and boom arm.
Insert threaded stud and tighten with hex nut to
secure.
Align the four (4) mounting holes on balun base
with four holes on boom; then insert steel bolts
and secure with steel split washers and hex
nuts. Tighten nuts to 36 ft-lbs (48Nm)
