2.
Type in the IP address in the URL: http://<IP ADDRESS>
(e.g. http://10.1.21.53)
3.
On first connecting to a camera, IE will probably
prompt to install Active X components which are used
in the camera web UI. Click
Install
to continue.
Following this step, a User Access Control window will
also appear to confirm installation.
4.
Once the process is complete, the Live View will be
displayed.
Adding the Camera to an NVR System
Please refer to the NVR instructions and Etrovision’s
firmware User’s Manual for additional details.
To add the EV8180 to an NVR using RTSP protocol, specify
the canera’s RTSP URL which will by default be in the
following format:
rtsp://[
IP ADDRESS
]/rtpvideo1.sdp
Restoring Factory Default Settings
There are 2 methods for restoring the factory default
settings:
－
Power on the camera, push and hold down the reset
button for 6 seconds. The camera will revert to factory
default settings (e.g. IP will reset to 192.168.1.2).
－
The web UI Setup (System
Factory Default) ;
network and user account data can be saved if desired.
Please refer to the User’s Manual for more information
on the web UI Factory Default functionality
