2. The micro SD card slot is located on the camera lens
module.
Network Settings and Configurations
1. Install
Etroscan
on a Windows PC
－
EtroScan
is a utility is used to configure network
settings for cameras & video servers.
EtroScan
can be downloaded at
http://www.etrovision.com
－
Run Setup.exe to install
EtroScan
.
2. Configure the Network Settings
The factory default IP address settings:
IP Address
:
192.168.1.2
Subnet Mask
: 255.255.255.0
Gateway
:
192.168.1.1
Run
EtroScan
(program available via Start
All
Programs
Etrovision Technology menu).
Scan displays all devices on the network. Use
192.168.1.2 IP, Model, and MAC Address to identify a
specific camera/video server.
Use Change Setting to change network settings. After
clicking Apply, enter “
pass
” for the password when
prompted.
Note
:
You can also double click the designated IP camera on
the
EtroScan
screen to enter Setting Page.
Access IP Camera Web Interface
When accessing an IP camera using the web interface for
the first time (or when the IP address changes), some
configuration for ActiveX controls are required.
1. Open an IE browser
2. Type in the IP address in the URL: http://<IP ADDRESS>
(e.g. http://10.1.21.53)
3. On first connecting to a camera, IE will probably
prompt to install Active X components which are used
in the camera web UI. Click Install to continue.
Following this step, a User Access Control window will
also appear to confirm installation.
4. Once the process is complete, the Live View will be
displayed.
Restore Factory Default Settings
1. Remove the 4 screws to remove the top cover.
2. Remove the bolts that attach the camera to the metal
plate.
3. The camera can then be moved to access the reset
button for restoring the factory default settings.
Note
:
You can also process the Restore Factory Default functions
via IP camera IE Web UI.
IP camera IE Web UI > Setup> System > Maintenance >
Restore Factory Default
Please refer to Users Manual for details.
Firmware Update
The firmware can be upgraded using the web UI or an SD
card. Please refer to Users Manual for details.
