5
Power on IP Camera
The positive and negative lines need to be connected. The middle port (outline in
red) is the positive.
The left and right are negative, and depend on if using DC12V or AC24V adapter.
Connect the power adapter to the power connector. The adapter should be
connected to 110v~22OV AC socket. There is no power button on the camera, so
connecting/disconnecting the power adapter will start/shutdown the IP camera.
2.3 Initial Network Configuration
To configure the IP camera’s network settings use the EtroScan™ utility.
Factory IP Address
Below are the initial factory IP address settings for the IP camera:
IP Address
192.168.1.2
Subnet Mask
255.255.255.0
Gateway
192.168.1.1
Using EtroScan™
EtroScan™ allows users to easily find an IP camera and configure the settings.
