5.
To adjust the lens focus, remove the rubber lens
cover and twist the lens right or left to adjust the
focus.
6.
To access the inside of the camera (for SD card
access or replacing dry pack), remove the 2
securing screws and gently pull out the internal
part by holding the lens.
WARNING
: Disconnect power before opening the
camera to avoid electrical accidents.
7.
To access the micro SD card slot, pull out the
internal part to expose the PCB boards. The SD
card slot is near the back.
8.
A 2
nd
drying agent pack is included in the plastic
packaging (silver package). If the lens is
experiencing fogging, then replace the existing dry
pack (the white rectangular object below labeled
DESICANT).
9.
The camera has a triple axis design for flexible
mounting. Below are the different joints which can
be adjusted.
3 Configure the Network Settings
The factory default IP address settings:
IP Address
192.168.1.2
Subnet Mask
255.255.255.0
Gateway 192.168.1.1
Run
EtroScan™
(program available via Start -> All Programs -> Etrovision Technology menu)
