II.
CHARGER LIGHT INDICATORS
When the charger power cable is plugged in, the charger box light will be activated.
a.
A red light on the charger box indicates that the battery is not fully charged,
but that there is a proper connection and the battery is receiving an electrical
charge. Full charge can take up to 8 hours depending on the level of depletion in
the battery.
b.
A solid green light on the charger box indicates your eTrike is fully charged.
Promptly unplug the charger once the green light is displayed.
III.
BATTERY REMOVAL
The battery can be removed from the eTrike if needed.
a.
Insert the key in the key hole on the right side of the battery frame.
b.
Turn the key clockwise. It unlocks the pin allowing the battery to be removed.
c.
Turn the knob on the battery and pull it out of the frame.
IV.
BATTERY INSTALLATION
a.
Make sure the key is in the unlock position.
b.
Slide the top part of the battery first and then push the bottom part until the
battery is fully inserted in the compartment.
c.
Turn the key counter clockwise. It locks the pin preventing the battery to be
removed.
CHARGING YOUR ETRIKE/BATTERY INFORMATION
Key Hole
Battery
Knob