ETQ
EASTERN TOOLS & EQUIPMENT INC
Tele: (888)908-6200
Web Site: easterntools.com
8
2
）
USING ELECTRIC POWER
1. AC APPLICATION
(a) Check the output pilot lamp for proper voltage.
(b) Turn off the switch(es) of the electrical appliance(s) before
connecting to the generator.
(c) Insert the plug(s) of the electrical appliance(s) into the
receptacle(s).
AUTO
THROTTLE
HIGH
ECO
CAUTION:
─────────────────────────────
z
Be sure the electrical load is turned off before plugging it in.
z
Be sure the total load is within the generator rated output.
z
Be sure the socket load current is within socket rated current.
z
The
AUTO THROTTLE SWITCH
must be turned to the
HIGH
position when using electric
devices that require a large starting current, such as a compressor or a submergible pump.
───────────────────────────────────────────────────────────
2
．
OVERLOAD INDICATOR LIGHT
The overload indicator light comes on when an overload of a connected electrical device is
detected, the inverter unit overheats, or the AC output voltage rises. The electronic breaker will then
activate, stopping power to the generation in order to protect the generator and any connected
electric devices. The output pilot light (green) will flicker and the overload indicator light (red) will
turn on, then the engine will stop running.
If so please follow the following steps
(a) Turn off any connected electric devices and stop the engine
(b) Reduce the total wattage of connected electric devices within the application range.
(c) Check for blockages in the cooling air inlet and around the control unit. If any blockages are
found, remove.
(d) After checking, restart the engine.
CAUTION:
───────────────────────────────────────────────────
z
The generator AC output automatically resets when the engine is stopped and then restarted.
