ETOP ITX-E16, User Manual, Page: 65 / 96

ITX-E16 User`s Manual 57
When you press [Disabled] or [Auto] on this item will show:
[Auto] is the default choice.
Phoenix-Award BIOS CMOS Setup Utility
On Chip IDE Device
IDE HDD Block Mode [Enabled]
On-Chip Primary PCI IDE [Enabled]
IDE Primary Master PIO [Auto]
IDE Primary Slave PIO [Auto]
IDE Primary Master UDMA [Auto]
IDE Primary Slave UDMA [Auto]
On-Chip Secondary PCI IDE [Enabled]
IDE Secondary Master PIO [Auto]
IDE Secondary Slave PIO [Auto]
IDE Secondary Master UDMA [Auto]
IDE Secondary Slave UDMA [Auto]
*** On-Chip Serial ATA Setting***
x SATA Mode
IDE
On-Chip Serial ATA [Auto]
x SATA PORT Speed Settings Disable
x PATA IDE Mode Secondary
x SATA Port PO, P2 is Primary
Item Help
Menu Level
►
If your IDE hard
drive suppers
block mode
select Enabled
for automatic
detection of the
optimal number
of lock
read/writes per
sector the drive
can support
↑↓← → ：
Move Enter: Select +/-/PU/PD: Value F10:Save Esc: Exit F1:General
Help F5:Previous Value F6:Fail-Safe Defaults F7:Optimized Default
(Figure11)