Rukus
owner’s manual
6
playiNG baCk Via blUETooTH
leD indicator
NoTE:
If the leD indicator blinks after turning on the unit,
then the unit is in Bluetooth mode, otherwise,
the unit is in auX mode.
1. Press the on/oFF
button to turn on the unit.
The power indicator lights up.
2. Press the
button to switch the sound source to
Bluetooth mode, if the unit is not already in Bluetooth mode.
3. Hold the
button for 3 seconds to place the unit in pairing
mode. The leD indicator starts blinking rapidly.
NoTE:
1. The leD indicator turns solid after the unit is
successfully connected.
2. If the leD indicator starts to blink slowly after
3 minutes, the pair was unsuccessful.
4. open the Bluetooth settings menu on your Bluetooth-enabled
mobile device or computer. once it is recognized, “rukus” will
appear on the display of the Bluetooth-enabled device. select
“rukus” to pair and connect with your device.
NoTE:
on an iPhone or iPad, tap “rukus” to select.
If prompted for a password, enter “1234”.
5. once Bluetooth is connected, select a desired music and press
the button on your device. The unit will playback music
automatically.
NoTE:
Fully charged 6 x aa batteries can playback ~10 hours,
depending on music level and other factors.
