10
Connecting illustration for remote sensing:
3.9 Auto Running Operation
3.9.1 Start Memory Address Setting
Press
[Menu] [5]
unti
l “Auto Start” is shown on the LCD.
The power supply enters auto run mode. Press
[Menu]
button to select functions in this menu.
Setting method 1: Press
[numeric buttons 0-9] [Enter]
to set start memory address.
Setting method 2: Press buttons
[
]
or
[
]
to move the cursor left or right. Rotate the rotary knob left or right to
increase or decrease the digit on cursor.
For example: Set the start memory address to 0.
Press
[0] [Enter]
.
3.9.2 End Memory Address Setting
Press
Menu]
button
until “Auto End” i
s shown on the LCD.
Setting method 1: Press
[numeric buttons 0-9] [Enter]
to set end memory address.
Setting method 2: Press buttons
[
]
or
[
]
to move the cursor left or right. Rotate the rotary knob left or right to
increase or decrease the digit on cursor.
For example: Set the end memory address to 8.
Press
[8] [Enter]
.
