- 13 -
then carries to the high bit of the sitting value.
When the setting value exceeds the maximum
rated value, the setting value is the maximum
ratings.
In the data editing mode of any setting
value, rotate the shuttle counter-clockwise, the
value of flicker bit minus "1"". If it less than
zero after minus 1, then borrow bit from the high
bit of the setting value. When the setting value is
less than 0, the setting date is 0.
In the editing mode of shortcut parameters,
press the jog key to cycle switch and edit the
voltage value or current value or time value in
the shortcut parameter; In the editing mode of
other setting value, press the jog key, and the
setting site of the date editing flash moves one
bit to the left. When the blinking setting site is
the highest bit of the current setting value, press
this button to shift the flicker to the Lowest bit
