6
4.3.3
Mode setting
When inputting the correct password and the display shows
, press “
△
” and
“*”
keys
simultaneously to the mode setting. The display shows the current setting value and change the type of the
modes by pressing
“
△
”
and
“
▽
”
keys. The changing series as following:
Working mode table
4.3.4
Other setting
Press the “
△
”or “
▽
”key can change the setting value.
1)
Sleep time setting
The station has an auto-sleep function. When not operating the station during a certain period of time
(the setting sleep time), the power supply will be cut off and the station will come into the sleep state.
a)
Select the needing mode and then press
“*”
key to the process of “sleep time” setting. The display
shows
and then press
“
△
”
or
“
▽
”
key to change the sleeping time. The range of sleeping time
is from 0 minute to 250 minutes
b)
After finishing setting the sleeping time, press
“*”
key to the process of off time setting
c)
To resume soldering, there are several ways as follows:
Turn the power switch off and then turn on
Press “*”
Working
mode
Temperature
range
Handle type
Tip type
Remark
0
80
℃
~480
℃
Electromagnet
Normal tip
is a
alarming
mark.
1
80
℃
~480
℃
Electromagnet
Big tip
0
80
℃
~480
℃
Electromagnet
Normal tip
1
80
℃
~480
℃
Electromagnet
Big tip
1
0
0
1
Press
△
Press
▽
Press
▽
Press
△
Press
△
Press
▽
Select working mode
Press* key
Setting temperature
Press * key
Press * key
Press * key
Press*
key
