EN 24
ERRORS
Error codes
Problem
Potential causes
Solution
FF
Insufficient water supply
• Make sure that the water faucet is completely open and that there
is no crack in the supply hose
• Check if the supply hose is clogged
• Restart the dishwasher
• Please contact the service department if the problem persists
F5
Pressure system failure
• Please contact the service department
F3
Flooding safety enabled
• Close the water faucet and contact the service department
F2
The dishwasher is not pumping out
• Check if the drainage hose is connected
• Check the bottom filter and filter group
• Restart the dishwasher and terminate the last selected program
• Please contact the service department if the problem persists
F8
Heating error
• Please contact the service department
F1
Flooding sound signal activated
• Turn off the dishwasher and close the water faucet
• Please contact the service department
FE
Interference in the electronics
• Please contact the service department
F7
Temperature in the machine is too high
• Please contact the service department
F9
Interference of divisor position
• Please contact the service department
F6
Interference of heating sensor
• Please contact the service department
HI
High voltage failure
• Please contact the service department
LO
Low voltage failure
• Please contact the service department
Call an authorised service if the problem still persists after the
controls or in case of any malfunction not described above.
Summary of Contents for VW247M
Page 1: ...INSTRUCTIONS FOR USE BEDIENUNGSANLEITUNG DISHWASHER GESCHIRRSP LER VW247M...
Page 30: ...EN 26...
Page 58: ...DE 26...
Page 59: ...DE 27...
