ETNA T4335TRVS, Instructions For Use Manual

Page: 37 / 44

EN 7
Grease filters
Removing the grease filters
Switch off the electricity! Remove the plug from the socket or switch
the electricity off at the mains. Remove the filters one by one, after
having disconnected the relative fastening elements.
Carbon filter
Replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
1. Remove the grease filters.
2. Attach the carbon filters to the motor.
3. Replace the filter grids in the extractor hood.
Note:
• Saturation of the activated charcoal will eventually occur after more
or less prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• In all cases it is necessary to replace the cartridge at least every
four months.
• DO NOT wash or reuse the carbon filter. Saturated carbon is not
environmentally friendly, change the filter regularly.
Lighting
Please note! Disconnect the appliance from the mains by removing
the plug from the socket before the changing the light.
Changing the light bulbs
1. Remove the grease filters
2. Replace the lamp with a new lamp of the same type.
3. Replace the grease filters.
Lamp Power (W) Socket Voltage
(V)
Dimension
(mm)
ILCOS Code
40
120
120
10
10
G
E
H
P
L
340
599
205
100
400
120
16
270
522
365
502
M
3 E14 220-240 102 x 35 DRBB/C-3-220-240
E14-35/102
MAINTENANCE
G