Instruction for use Nova freshbrew FT
25
© ETNA Coffee Technologies b.v.
C O F F E E T E C H N O L O G I E S
1. Remove the mixing funnel for coffee and tea.
2. Clean the mixing funnel using hot water.
3. Remove the filters from the brewing group; put the tool in the
cylinder and push the filter up.
4. Clean the filters with cleaning agent and hot water, this takes at
least 30 min.
5. Clean the other parts of the brewing group with a damp cloth if they
are dirty.
6. Put the filters back.
7. Put the brewing group back together again. Ensure that the wiper
arm is between the drive arms.
Replace the brewing group in the machine:
1. Hang the brewing group in the suspension bracket.
2. Pull and turn the lock pin upwards so that the brewing group is
disabled.
3. Fit the dispensing nozzle of the coffee brewing group.
4. Fit the dispensing nozzle of the tea brewing group.
5. Insert the espresso mixer holder (if available).
6. Insert the dispensing holder.
7. Insert the service key.
8. Press button 5; repeat until the brewing group is completely closed.
9. Attach the water supply to the coffee brewing group.
10.Attach the water supply to the tea brewing group.
11.Remove the service key.
12.Close the door.
➭
The brewing group will only be fully in position when the
brewing group is closed.
Figure 4-8
Figure 4-9