ETNA KI390ZT, Instructions For Use Manual

Page: 31 / 84

EN 11
USE
Indications in the display
Cooking
zone
display
Cooking zone status
Power level cooking zone; 1 = low level / 9 = high level
Cooking zone boost level active.
No (suitable) pan on cooking zone (pan detection symbol).
Fault code; See ‘Troubleshooting table’.
Residual heat indicator; The hob has a residual heat indicator for each cooking
zone to show those which are still hot. Although the hob is switched off, the
indicator ‘H’ will remain on for as long as the cooking zone is hot!
Avoid touching them when this indicator is lit.
Danger! Risk of burns.
Child lock function active.
Hob power configuration menu. Contact a professional installer.
Cooking-timer/alarm
• A cooking-timer can be set for each cooking zone.
• The hob also has an alarm. Both the cooking-timer as well as the alarm can be set for a
maximum of 99 minutes.
• The alarm works in the same way as the cooking-timer, but is not linked to a cooking zone.
If the alarm has been set, it will continue counting down after the hob has been switched off.
• The alarm can only be switched off when the hob is switched on.
Select the desired function:
• Cooking-timer
— the timer is linked to a cooking zone. After the set time has elapsed, the
cooking zone will switch off automatically.
• Alarm — the alarm only beeps after the set time has elapsed.
<->