ETNA FG860ZT, Instructions For Use Manual

Page: 40 / 60

EN 12
OPERATING THE OVEN
Programming the end time
1. Press the setting dial twice.
The ‘stop’ indicator lamp will flash.
2. Turn the setting dial right or left to set the end time.
3. Press the setting dial again.
The end time has been set; the ‘stop’ indicator lamp lights up.
4. Select a temperature with the temperature knob and an oven function
with the function knob.
The red function indicator light and the orange temperature indicator
light will light up; the oven is switched on.
▷ When the set time has elapsed, the alarm will sound and the
indicator lamp will flash. Press the setting dial to switch off the
alarm and indicator lamp.
▷ If you don’t do anything, the alarm will switch off automatically
after 1 minute. The indicator lamp will stay flashing until you
have pressed the setting dial.
5. After the cooking time has elapsed, turn the temperature knob and
the function knob to ‘0’ to also switch off the oven indicator lights.
Programming the start and end time
1. Press the setting dial once.
The ‘start’ indicator lamp will flash.
2. Turn the setting dial right or left to set the start time.
3. Press the setting dial again.
The start time has been set; the ‘start’ indicator lamp lights up and
the ‘stop’ indicator lamp flashes.
4. Turn the setting dial right or left to set the end time.
5. Press the setting dial again.
The end time has been set; the ‘stop’ indicator lamp lights up.
6. Select a temperature with the temperature knob and an oven function
with the function knob.
The red function indicator light and the orange temperature
indicator light will light up; the oven switches on when the start time
has been reached.
▷ When the set time has elapsed, the alarm will sound and the
indicator lamps will flash. Press the setting dial to switch off the
alarm and indicator lamps.