ETNA EWM246KWIT, Instructions For Use Manual

Page: 21 / 32

452515
* UKS: universal stability control - this function prevents excessive vibrations during spinning.
In case you were not successful in repairing the malfunctions in
spite of the above suggestion chart, call the nearest authorized
service shop.
Repairing the failure arising from inappropriate connections or
use of the appliance is not covered by the guarantee, and the
repair expenses are paid by the customer.
21
Failure Possible cause Remedy
FAILURE 5
Motor operation
interrupted; or motor does
not operate (the machine
reports a failure - the
LEDs periodically
fl ash
fi ve times)
Motor overload or motor failure. • Turn off the appliance and wait for
a few seconds;
• turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.
FAILURE 6
Program temperature not
reached (the machine
reports a failure - the
LEDs periodically
fl ash six
times)
• Heater failure
• Inlet water too cold
• Manual addition of water • Turn off the appliance and wait for
a few seconds;
• turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.