ETNA EVW8262, Instructions For Use Manual, Page: 40 / 62

EN 10
OPERATION
Prior to initial use
Attention:
• Always fill the salt reservoir and adjust the water hardness setting
before using the dishwasher (see page 13 and 14).
• Also fill the rinse agent reservoir and the detergent reservoir (see
page 14, 15, 16 and 17).
Overflow protection
Your dishwasher is equipped with a safety device which prevents the
dishwasher from being overfilled with water. The safety device closes
the intake valve and assures that the dishwasher pumps out the excess
of water. When there is water inside the diswasher (because too
much water is pumped in or in case of a leakage), the water has to be
removed before you switch on the dishwasher again.
Switching on
1. Open the door of the dishwasher.
2. Check if the plug of the connecting cord is in the socket.
3. Check if the water supply is turned on.
4. Load the dishwasher (see page 17: ‘loading the baskets’).
5. Pour in the detergent.
6. Press the On/Off button to switch on the appliance. The indicator will
light up when the machine is switched on.
7. Select the desired cycle (see page 12 and 13).
▷
Press repeatedly the washing program selector button to select
the desired washing program. The indicator of the selected
program will light up.
▷
Press, if desired, the button ‘half load’ and/or ‘delayed start’.
8. Close the door.
9. Press the start button to start the washing.
Delayed start
If you want the dishwasher to switch on at a later time, you can used the
‘delayed start’ button. You can choose to delay the start time from 1 to
24 hours. Each press of the button changes the delay time with one hour.