28
Before calling for service
Problem
Dishes and flatware are not
clean.
Cloudiness on glasware.
Black or gray marks on
dishes.
Detergent left in dispenser
cups.
Dishes are not dried.
Possible causes
Improper rack loading.
Improper program.
Not enough detergent was
dispensed.
Items are blocking the path
of spray arms.
The filter assembly is not
clean or is not correctly
fitted.
Spray arms not clean.
Combination of soft water
and too much detergent.
Aluminum utensils have
rubbed against dishes.
Dishes block detergent cups.
Improper rack loading.
Not enough rinse aid.
Dishes are removed too
soon.
Wrong program has been
selected.
Dishware not suitable for
dishwasher.
What to do
See “Loading the diswasher racks” on page 24.
Select stronger program, see page 19.
Use more detergent, or try another brand of detergent.
Rearrange the items so that the spray can rotate freely.
Clean de filter assembly and ensure that it is fitted
correctly (see page 24).
Clean the spray arms (see page 24).
Use less detergent if you have soft water and select a
shorter cycle to wash the glassware and to get them
clean.
Use a mild abrasive cleaner to eliminate the marks.
Re-loading the dishes properly so that they do not
block the detergent dispenser.
See “Loading the diswasher racks” on page 22.
Increase the amount of rinse aid (see page 21).
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Wait a couple of minutes before unloading the
diswasher. Empty the low basket first. This prevents
water form dropping off dishes in the upper basket.
In the rapid program the washing temperature is
lower. This also lowers cleaning performance. Choose
the normal program.
Some dishware (plastic or with a plastic coating) is
more difficult to dry in a dishwasher.
Code
The display shows
E1
The display shows
E3
The display shows
E4
The display shows
E6
or
E7
Problem
Longer inlet time.
Heating takes too long, the
required temperature is not
reached.
Leakage.
Temperature too high.
Possible causes
Faucet is not opened, or water intake is restricted, or
water pressureis too low.
Malfunction of temperature sensor or heating element.
Some part of the dishwasher leaks water.
Contact the Service department.
Short circuit or break of temperature sensor.
Error codes
Unsatisfactory
washing results
Unsatisfactory
drying results
