25
Cleaning the door
To clean the edge around the door, you should use only a soft warm, damp rag. To prevent
penetration of water into the door lock and electrical components, do not use a spray cleaner
of any kind. Also, never use abrasive cleaners or scouring pads on the outer surfaces because they
will scratch the finish. Some papers towels can also scratch or leave marks on the surface.
WARNING !
Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed to use
the abrasive agent or some paper towel because of the risk of scratching or leaving spots on the stainless steel surface.
How to keep your dishwasher in shape
About the electrical connection
Electrical requirements
This dishwasher is designed for connection to 220-240 V - 50 Hz, with a fuse of 16 Amp.
WARNING!
Make sure the electrical socket is earthed before connecting the appliance.
Electrical connection
After making sure that the voltage and the frequency values for the current in the home correspond to those on the rating plate, insert
the plug into an electrical socket which is earthed properly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug, please consult the manufacturer or its service agent or a similarly qualified person.
■
After every wash
After every wash, turn off the water supply to the
appliance and leave the door slightly ajar so that
moisture and odors are not trapped inside.
■
Remove the plug
Before cleaning or performing maintenance, always
remove the plug from the socket. Do not run risks.
■
No solvents or abrasive cleaning
To clean the exterior and rubber parts of the dishwasher, do
not use solvents or abrasive cleaning products. Rather, use
only a cloth and warm soapy water. To remove spots or stains
from the surface of the interior, use a cloth dampened with
water and a little white vinegar, or a cleaning product made
specifically for dishwashers.
■
When you go on holiday
When you go on holiday, it is recommened that you run a
wash cycle with the dishwasher empty and then remove the
plug from the socket, turn off the water supply and leave the
door of the appliance slightly ajar. This will help the seals last
longer and prevent odors from forming within the appliance.
■
Moving the appliance
If the appliance must be moved, try to keep it in the vertical
position. If absolutely necessary, it can be positioned on its
back.
■
Seals
One of the factors that cause odors to form in the dishwasher
is food that remains trapped in the seals. Periodic cleaning
with a damp sponge will prevent this from occurring.
CAUTION!
for personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD.
