29
INSTALLATION
Door Swing Reversal
The refrigerator has the capability of opening
the door from either the left or the right
side. The unit is delivered to you with the
door opening from the left side. To change
the opening direction, please follow these
instructions.
Note:
Before reversing the door swing,
unplug the appliance from the mains or
disconnect the electrical power supply.
1. Remove the screws (6) holding the top panel
(7) to the unit. Remove the top panel
2. Remove the two screws (1) holding the top
hinge (5) (right side) to the frame. Remove the
top hinge (5).
3. Lift the door off the bottom hinge pin and place
it on a nonscratching surface.
4. Remove the two screws (8) holding the bottom
hinge (2). Remove the bottom hinge (2).
5. Remove the left front leg (4) and transfer it to
the right side.
6. Before replacing the bottom hinge (2), remove
the hinge pin (9) and reverse the direction of
the hinge (2). Reassemble the bottom hinge
(2) on the left hand side using the two
screws (8).
7. Refi t the hinge pin (9) into the bottom hinge (2).
8. Lower the door onto the bottom hinge pin (9).
9. While holding the door in the closed position,
reassemble the top hinge (5) on the left hand
side using the two screws (1). Do not tighten
the screws (1) until the top of the door is level
with the counter top.
10. Refi t the top panel using the screws (6).
Door opening left
Door opening right
Summary of Contents for EKK0852WIT
Page 32: ...700003905400...
