ETNA AP360ZT, Instructions For Use Manual

Page: 38 / 44

EN 8
Carbon filter
Replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
1. Remove the grease filters.
2. Attach the carbon filters to the filter.
3. Replace the grease filters.
Note:
• Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• The carbon filter needs to be replaced at least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
Lighting
Changing the light bulbs
Please note! Disconnect the appliance from the mains by removing
the plug from the socket before the changing the light.
1. Remove the grease filters.
2. This gives access to the light bulbs.
3. Unscrew the lamp from the fitting and replace it with a lamp of the
same wattage.
Lamp Power
(W)
Socket Voltage
(V)
Dimension
(mm)
ILCOS Code
4 E14 220-240 107 x 37 DRBB/F-4-220-240
E14-35/100
5 GU10 230 52 x 50 DRPAR-5/840-220/240-
GU10-35/36
DRPAR-5/830-220/240-
GU10-35/36
MAINTENANCE