ETNA AKV378WZIL, Instructions For Use Manual

Page: 55 / 128

EN 25
MAINTENANCE
Defrosting the appliance
Automatic defrost of the refrigeration compartment
The refrigeration compartment defrosts automatically from time to time.
Defrosting of the NoFrost freezer
The NoFrost freezer defrosts automatically. Any frost deposits will then disappear.
Any ice or frost deposits that nevertheless form in the freezer compartment can be caused by
unusual use of the appliance (opening the door too often and too long or poorly sealing door,
etc.). The freezer will then need to be defrosted manually.
Switch off the appliance in the event of extreme ice formation. Remove the food in the
freezer and protect it so that it cannot partially or completely thaw. Clean and dry the
interior of the freezer. Switch on the appliance and adjust the temperature to the required
setting before you put the food back into the freezer.
Cleaning the appliance
Switch off the appliance and remove the plug from the socket before you start cleaning it.
Do not use abrasive cleaning agents, as they can damage the surface.
Activate the intensive freezing function 24 hours before you plan to clean the freezer.
• Before cleaning, frozen foods should be wrapped in several layers of paper and kept in a
cool place. The inevitable rise in temperature will shorten their storage life.
Remember to use these foods within a relatively short period of time.
• Regularly clean the interior of the appliance with lukewarm water. If so required, add a
neutral cleaning agent or special refrigerator cleaner to the water. Clean all surfaces with
a soft cloth. Wipe the cleaned parts with a cloth with clean water and then dry them
thoroughly.
• Do not put parts of the appliance in a dishwasher: this could damage them.
• Dry the interior of the appliance. Do not switch on the appliance until the door seals are
completely dry. Start the appliance at the lowest temperature setting. After 24 hours, set the
thermostat to the normal temperature.