ETNA AKV378IRVS, Instructions For Use Manual

Page: 56 / 144

EN 22
Water and ice dispenser
Clean the water and ice dispenser before using it for the first time (see ‘Maintenance’).
If the child lock is activated or the door is open, the dispenser will not operate.
Note
If the water reservoir pictogram is illuminated, the water reservoir has not been positioned
correctly or is not present at all. Make sure the water reservoir is positioned correctly.
Then switch off the pictogram by pressing the ECO key for 3 seconds.
1. Make sure the water tank is installed correctly.
2. Fill the water tank up to max. 4.5 liters of water.
Use clean and cold tap water, bottled water without added minerals or distilled
watersuitable for consumption. Do not use warm water.
3. Press the water key, crushed key (crushed ice) or cubed key (ice cubes).
▷ The pictogram is illuminated.
4. Place your glass underneath the water and ice outlet and push gently against the dispenser
lever with your glass. Make sure the glass is in line with the dispenser to prevent the water
from splashing out or the ice from bouncing out.
OPERATING THE APPLIANCE