EN 12
INSTALLATION
• Move the two parts of the inner frame (B and C) until the desired
height has been reached (see diagram). Fasten the inner frame
using the 8 screws (G). Make sure that the front plate is placed on
the side where the controls are.
• Place the bottom (L) and the top (K) part of the telescopic tube over
the inner frame.
• Mark drilling holes on the ceiling with the template and drill 4 holes
(8 mm). The arrow on the template indicates the front of the cooker
hood.
• Screw 3 screws into the holes until they still stick out about 5 mm.
Attention; don’t yet insert a screw in the hole marked X on the
template.
