Page 6 of 20
For Support C61-2-9956-7377
Or
Etm770 Users Manual 201709rv01
28.0
Mini USB
SIM Holder
Slide catch back
before inserting SIM,
lock into position
once SIM is inserted
70.0
115.0
OK
Primary/Main
Antenna Connector
SMA Jack
Secondary
Antenna Connector
SMA Jack
On/Off Button
To turn off hold for > 3s
Note unit may not turn off
when actively performing
a task, such as signal
scanning, return to Main
Menu to then turn off the unit
Scroll Up/Scroll Down Buttons
Move up or down the menu list
OK Button
Confirm/Make Selection
Interfaces
Min USB
The Mini USB located on the top left of the unit
is used both for programming the unit using a
terminal program as well as for charging the
unit.
SMA Antenna Connectors
Two SMA Jack antenna connectors are located
top centre of the unit. A suitable antenna(s) can
be connected directly or via the use of an
adaptor if required. FME adaptor included with
unit.
Note it is recommended that scanning be
performed using the antennas that are intended
to be deployed, in the location/mounting
arrangement intended. Results can vary
significantly between antennas and with
differing location and mounting arrangement.
SIM Holder
The units SIM holder is located top right of the unit. Please take care to ensure the unit is off when
the SIM is removed or inserted, also ensure that the SIM is inserted correctly.
Initial Setup
Item
Default Setting
Notes
Radio Band Selection
All bands for Both 3G and 4G
This can be modified, refer
Radio Band
APN
The unit will have a default list of 5
APN's entered:
telstra.internet
telstra.extranet
yesinternet
internet
live.vodafone.com
It is likely you may need to be able to select a different
APN, refer
Set APN (Access Point Name)
Username and password
"username"
"password"
It is likely you may need to be able to select a different
username and password, refer
Username and
Password
SIM Pin
This is not set
If required to be set contact ETM
IP addresses and ports for ping
test
These are not set
If required to be set refer
Checking IP Connectivity
