Installation manual (ver. 2/2018)
ETLOC-50 SECURITY
4
The vehicle unit must not be placed in close proximity to
solid metal structures
(the vehicle
unit has an integrated GSM antenna) or in close proximity to other devices with
increased
electromagnetic radiation
(e.g. control units, electric motors, power relays, servo-drives etc.).
2.
Connecting the cable harness
While connecting to the vehicle wiring, the wiring harness must be disconnected from the
vehicle unit.
Basic installation is done via three wires (black, red and yellow).
The remaining wires are used for specific features of the vehicle unit.
The wiring diagram of the
ETLOC-50 SECURITY unit
IMPORTANT
