SAVE THESE INSTRUCTIONS - READ ALL INSTRUCTIONS CAREFULLY
INSTALLATION FOR RTP42 SERIES
Head Office -
1850 Wilson Ave. · Toronto, ON · M9M 1A1 ·
Tel:
416.741.7336 ·
Fax:
416.741.9104
Toll free:
in Canada. 1.800.661.9610 · in USA. 1.888.762.5384 (SOCKETS4U)
www.etlin-daniels.com· For sales/service questions - [email protected]
SURFACE MOUNT
CABLE SUSPENDED MOUNTING
1. Assemble the mounting frame with the 8 screws(included)
2. Mount the frame on the ceiling with the screws (not included). Make sure that the wire is long enough for Step4
3. After mounting the frame on ceiling, REMOVE one side of the mounting frame
4. Connect the wires from mains to the LED driver. Then,slide in the LED panel unit to the frame.
5. Put back the side on removed frame.
figure #1
figure #1
figure #1
figure #4
figure #5
figure #2
figure #3
1. Release the back's screw and lock again with the provided brackets which are used for fixing adjustable cables (Four brackets for 2x2 & 1x4, six ones for 2x4).
2. Pull the end cap of cable (A) through the provided ceiling device and make sure the end cap positioned in the ceiling device. Fix the devices onto the ceiling by the self-tapping screws.
3. Pull the end of cable (A) to adjust the cable (A) to the desired height of luminaire.
4. Hook the luminaire up to the hooks attached to the other end of cable (B) and make a final adjustments.
5. Connect LED driver to AC main power.
ceiling device
cable A
self-tapping screw
cable B
