57
This function is used for receiving a signal through the RF modulator.
If your receiver has no 'TV ANT IN' terminal in the rear panel, this key may not
work.
Press
‘TV/SAT’
. The signal reception path will change to RF modulator and
‘TV/SAT’
LED on front panel will be lit.
The signal output through the RF modulator will be as follows :
You can use this menu when you change a TV channel to a Radio channel or
vice versa.
Press
‘TV/RADIO’
.
When listening a radio channel,
‘r001’
will be displayed on the front panel.
TV/SAT LED
Power ON
Power OFF
ON
TV ANT IN signal will be out.
OFF
Decoded signal will be out
TV ANT IN signal will be out.
through RF.
1
TV / SAT switching
2
TV / RADIO switching