Use as an additional siren
If the siren is used as an additional siren, it must be
registered to your alarm’s control panel. If the alarm
is triggered, the ES-S7AU will ring out and its LED
lights will turn on.
Register the ES-S7AU in the control panel
Regardless the system is armed or disarmed,
press the Connect button to switch to Connection
mode. The LED indicator turns on: you are now in
connection mode for 20 seconds. Press any of the
“
SOS
”, “
Disarm
” or “
Arm
” buttons on the control
panel of your alarm system. You hear short beeps:
the siren has been registered in the control panel
successfully.
Note
Do not trigger any sensor when registering the
siren in the control panel.
Test
Press the “
Arm
” button on the control panel. The
built-in speaker of the control panel beeps and
the LEDs of the ES-S7AU turn on for 4 seconds: the
connection is successful. If not, the connection has
failed, try registering the siren again.
