background image

Standards 

  

  

This product bears the selective sorting symbol for 

waste electrical and electronic equipment (WEEE). 

This means that this product must be handled 

pursuant to European Directive 2002/96/EC in 

order to be recycled or dismantled to minimize 

its impact on the environment.  For further 

information, please contact your local or regional 

authorities. Electronic products not included in the 

selective sorting process are potentially dangerous 

for the environment and human health due to the 

presence of hazardous substances.

In compliance with European laws. This product 

is in compliance with the essential requirements 

and other relevant provisions of Directive 

1999/5/EC (R&TTE). 

This product was designed and manufactured 

in compliance with Directive 2002/95/EC of the 

European Parliament and of the Council on the 

restriction of use of certain hazardous substances 

in electrical and electronic equipment (RoHS 

Directive - RoHS) and is deemed to comply with 

the maximum concentration values set by the 

European Technical Adaptation Committee (TAC).

Manufactured in China.

ES

-D4A

-UM

-EN20150212-3.1-

W

Summary of Contents for ES-D4A








Reviews: