SETUP
DOC_DEV_Router setup guide_A
page 19
3
Cellular interface setup
This section applies to the below routers:
IPL-C, IPL-DAC, SIG-C, RAS-C, RAS-EC, RAS-ECW
For some models, two SIM cards can be inserted in the router to allow the use of two different cellular
networks.
The network corresponding o the SIM card Nr1 is the main network, while the other one is the backup
network.
•
To set-up the cellular network interface, select Set-up > WAN interface
« Connection type » list :
Select the «
cellular” choice.
“Priority” parameter
That parameter defines the priority of the path when more than one path is selected (Cellular & Ethernet
WAN, for instance).
The router will use first the interface having received the highest priority; the other interface will be used as a
backup path.
“SIM card” parameter
It is possible to select the SIM card Nr1, or the SIM card Nr2 or both.
SIM card parameter
Value
SIM1
The SIM 1 is selected (default value)
SIM2
The SIM 2 is selected (default value)
SIM 1, backup to SIM2
The SIM 1 is used first ; the SIM 2 is used as backup
3.1
SIM 1 or SIM 2 set-up
Setting-up the SIM card 1 or the SIM card 2 is identical. We describe hereafter the SIM 1 set-up.
SIM 1 : Modem set-up
« Modem initialisation string » parameter :
Leave that field empty.
« APN » parameter :
Enter the label of the gateway (APN) to the Internet - or to other services - provided by the mobile service
provider.
« PIN code » parameter :
Enter the SIM card pin code.
As long as the PIN code has not been correctly entered, the OPERATION led indicator flashes (red colour).
Summary of Contents for RAS Series
Page 1: ...DOC_DEV_Router setup guide_A RAS IPL SIG _________________ SETUP GUIDE _________________ ...
Page 8: ......
Page 14: ......