813-513/10.02.14
supplied by
Electronic Temperature Instruments Ltd
Worthing · West Sussex · BN14 8HQ
tel: 01903 202151 · email: [email protected]
www.etiltd.com
Change battery
according to
polarity
Battery Cap
ON-OFF /
HOLD button
CAL button
Immersion
level
Protective Cap
Sensor inside
Lift latch here then
push cap up to open
First close the battery cover
as this unit is supplied with
the battery cover open to
conserve the battery life.
Close the battery cover by
pressing the cap on a hard
surface, you should hear a
'click' which indicates that
the cover is shut.
To open the battery cover
use a small flat blade
screwdriver on the
latch whilst pushing
the battery cover
(as pictured).
BATTERY REPLACEMENT
INSTALLING BATTERIES
GUARANTEE
- This instrument carries a one-year warranty against defects in either
components or workmanship. During this period, products that prove to be defective will,
at the discretion of ETI, be either repaired or replaced without charge. The product warranty
does not cover damage caused by fair wear and tear, abnormal storage conditions,
incorrect use, accidental misuse, abuse, neglect, misapplication or modification. Full details
of liability are available within ETI's Terms & Conditions of Sale at www.etiltd.com/terms.
In line with our policy of continuous development, we reserve the right to amend our
product specification without prior notice.
