South Bend, Indiana USA
|
networketi.com
ASM-1 INSTALLATION GUIDE | PART NO.
23681
REV
A
4
2. Connect to the dehydrator(s) and change dehydrator
IP address(es) as needed. Perform Reset Procedure
as described in Instruction Manual if needed and
change dehydrator IP address to 192.168.52.9, then
complete configuration. Configure each dehydrator
as entered on Smart Manifold Port Info page.
3. Following configuration of each dehydrator, turn Smart
Manifold power back on and begin system operation.
Contacting Customer Service
For technical help, questions or comments concerning
this product or any ETI product contact Customer Service
8:00 a.m. - 5:00 p.m. EST.
Email:
Web:
networketi.com
Mail:
ETI
1850 North Sheridan Street
South Bend, IN 46628
LIMITED WARRANTY
ETI’s two year limited warranty covering defects in
workmanship and materials applies. Contact Customer
Service for complete warranty information.
DISCLAIMER
ETI makes no representations or warranties, either
expressed or implied, with respect to the contents
of this publication or the products that it describes,
and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose. ETI
reserves the right to revise this publication, and to make
changes and improvements to the products described
in this publication, without the obligation of ETI to notify
any person or organization of such revisions, changes or
improvements.
Copyright © 2019 ETI,
®
All rights reserved.
