South Bend, Indiana USA
|
networketi.com
ADH INSTRUCTION MANUAL
|
PART NO
.
2
4
100
REV
B
6
With the ground wire, power
connector and Ethernet cable
reconnected, close the lid of
the NEMA enclosure and
secure the two latches opposite
the hinges. Secure the lid in
place by reinstalling the two
captive screws in the two outer
corners of the lid.
Restore machine power by
plugging the unit back in.
14.
15.
QUESTIONS AND COMMENTS
For technical help, questions, or
comments concerning this or any
ETI
, Inc., product, contact the
Customer
Service
Department
between 8:00 a.m. and 5:00 p.m. EST.
DISCLAIMER
ETI, Inc. makes no representations or
warranties, either expressed or implied
with respect to the contents of this
publication or the products that it
describes, and specifically disclaims any
implied warranties of merchantability or
fitness for any particular purpose. ETI,
Inc. reserves the right to revise this
publication and to make changes and
improvements
to
the
products
described in this publication without the
obligation of ETI, Inc. to notify any
person or organization of such
revisions, changes or improvements.
No part of this manual may be
reproduced or translated in any form or
by any means, electronic or mechanical
including photocopying and recording,
for any purpose without the express
written consent of ETI, Inc.
The ETI logo, We Manage Heat, and
ADH are registered trademarks of ETI,
Inc. NETCOM is a trademark of ETI, Inc.
Copyright © 2012 ETI, Inc. All rights
reserved.
