ASSEMBLY INSTRUCTION FOR ANTI-TIPPING INSTALLATION
(1X)
BELT
ANTI-TIPPING
HARDWARE ENCLOSED
(1X)
WALL SCREW
M5x50mm
A
B
(1X)
SCREW
M5x30mm
C
(1X)
WASHER
Ø6
(1X)
WALL PLUG
M8x40mm
D
E
INSTRUCTION
1. Install anti-tipping belt (A),washer (D) with M5x30mm screw (C) into the pre-drilled hole on the top back
frame of the mirror.
2. Using a 1/4” diameter drill bit, drill the wall at the same level as the anti-tipping belt (A) on the mirror.
Install the wall plug (E) into the hole.
3. Connect the anti-tipping belt (A) with wall screw (B) into the wall plug (E).
TOOLS
SCREWDRIVER
(not included in package)
DRILLING MACHINE
(not included in package)
INSTALLING ANTI-TIPPING SYSTEM
A
D
C
E
B
PENCIL
(not included in package)
1
2
3
4
5
AS WALL MATERIALS VARY,
THE SCREW INCLUDED ARE FOR BRICK WALL.
FOR ADVICE ON SUITABLE SCREW SYSTEMS,
CONTACT YOUR LOCAL SPECIALISED DEALER.
X1
NOTICE
PRE-DRILLED HOLE
FOR SCREW
