KL6600
www.ethink-spa.com
7
There is a short circuit place “light” to see whether the control lamp hold synchronizer inside
or not.
Ⅳ
).The operation of “
AUX
”
“
AUX
” is to control an additional load to be ON/OFF .And the additional load can be used
for DVD/TV or others, and its MAX power is 1KW/230V.
Ⅴ
) Automatically anti-freeze (It is effective when working with heater)
When the water temperature is below 44
℉
/6.7
℃
or much lower, anti-freeze is automatically
starting, all the pumps and blower work for 30 seconds and then turn off. The heater and
circulating pumps turn on. The panel shows “
”
When the water temperature is reaching 46
℉
/7.8
℃
or above, all the heaters and circulating
pumps stop working.
Ⅵ
). The operation of auto moisturizing (B3=ON):
1. When the water level pin detects that there is no water, LCD shows “
”, then moisturizing
function would start auto and at this time, LCD shows “
”.
2. When it doesn’t reach the water level pin in 30 minutes, (maybe there is no tap water), the
moisturizing solenoid valve would temporary close, then LCD shows “
”(water flow in
pause), after 30 minutes, the moisturizing solenoid valve would start again. In this way, after it
repeats to fill the water, the “
” will disappear.
***
Additional Remarks
***
1. There is a water level detection and a water flow detection inside the heater, which are used for
controlling the heater and the pump.
2. Water level pin is only for auto moisturizing.
