GE3100 www.etherwan.com
User’s Manual 19
Wake-on-LAN (WOL) Setting
PCI Express Gigabit Ethernet Adapter should be changed from
PCI Express (default setting) to Wake-on-LAN (WOL).
PCI Express (default setting): Change jumper cab to position 2
and 3 of JP3.
Wake-on-LAN (WOL): Change jumper cab to position 1 and 2
of JP3.
Connect an AC to DC power adaptor (5V, 2A) to the 5V DC
Jack on the PCI Express Gigabit Ethernet Adapter, and then
attach the plug into a standard AC outlet.
For Wake-on-LAN (WOL), PCI Express Gigabit Ethernet Adapter
must be set to 1.0 Gbps Full Duplex.
For Windows XP, please must use our Windows XP driver.
Link Speed & Duplex
: Start / Control Panel / Network
Connections / Click mouse right button on Local Area Connection
(Realtek PCIe GBE Family Controller) / Choose “General” / Click
“Configure” button / Advanced / Property: Choose “WOL &
Shutdown Link Speed” / Value: Choose “Not Speed Down”
Link Speed & Duplex
: Start / Control Panel / Network
Connections / Click mouse right button on Local Area Connection
(Realtek PCIe GBE Family Controller) / Choose “General” / Click
“Configure” button / Power Management
Please enable “Allow the computer to turn off this device to save
power” and “Allow this device to bring the computer out of
standby”.
For Windows 7, please follow below procedures:
Link Speed
: Start / Control Panel / Network and Internet / Network
and Sharing Center / Change adapter setting / Click mouse right
button on Local Area Connection (Realtek PCIe GBE Family
Controller) / Choose “Properties” / Click “Configure” button /
Advanced / Property: Choose “Link Speed” / Value: Choose “1.0
Gbps Full Duplex”
