Industrial PoE Ethernet Switch
LED State
Indication
Steady Power
on.
Power1
Power2
Power3
Off Power
off.
Steady
Power redundant system failure occurred.
Fault
Off
Power redundant system failure is not
occurred.
10/100Base-TX, 100Base-FX/BX
Steady
A valid network connection established.
Link/ACT
Flashing
Transmitting or receiving data.
ACT stands for ACTIVITY.
Steady
Valid port connection at 100Mbps.
10/100
Off
Valid port connection at 10Mbps.
Power Input Assignment
Power3 48VDC
DC
Jack
＋
48VDC
Power2
－
Power Ground
＋
48VDC
Power1
－
Power Ground
Earth Ground
Terminal Block
Relay Output Rating
1A @ 24VDC
Relay Alarm Assignment
FAULT
*Relay warning signal disable for following:
The relay contact closes if Power1 and
Power2 are both failed but Power3 on.
The relay contact closes if Power3 is failed
but Power1 and Power2 are both on.
DC Terminal Block Power Inputs: There are two pairs of
power inputs can be used to power up this switch. Redundant
power supplies function is supported.
The 10/100Base-TX and 100Base-FX/BX Connectors
1. The 10/100Base-TX Connections
The following lists the pinouts of 10/100Base-TX ports.
2
