Ethernet Extender
4
User’s
Manual
One-Channel Ethernet Extender
Ports
The Ethernet Extender provides one TX port and one VDSL port.
For the TX port, it uses RJ-45 connector and auto senses the speed of
10/100Mbps.
For the VDSL port, it uses RJ-11 connector and auto senses the speed of
1/3/5/10/15/20/25/30Mbps.
VDSL Mode Settings
VDSL mode settings are made very simple by means of a DIP (Dual Inline
Package) switch at the rear panel of the VDSL Extender.
DIP switch
There is one pin on the DIP switch for VDSL mode settings. Refer to the
table below for more details. One end must be set to Loc and the other to
Rmt when two devices are connected.
Loc Rmt
The device operates in local mode The device operates in remote mode
Front Panel & LEDs
LED Indicators
The LED indicators give you instant feedback on status of the Ethernet
Extender: