EtherWAN EMC400 Quick Start Manual Download Page 2

Page: 2 / 2

EMC400 www.etherwan.com

70G-EMC400XQ1

Installing Media Converter to Chassis



Please unscrew the carrier from the desired bay first to install a media converter onto any of the carriers.



Fit the media converter onto the carrier.



Insert the carrier to the guide rails of the bay slot when the media converter is completely seated onto the carrier.



Carefully slide in the carrier until it is fully and firmly fitted to the power socket. Fasten the screws on the carrier.

Assembly, Startup, and Dismantling



Assembly: Place the device on the DIN-Rail from above using the slot. Push the front of the device toward the mounting

surface until it audibly snaps into place.



Startup: Connect the supply voltage to start up the device via the terminal block.



Dismantling: Pull out the lower edge and then remove the device from the DIN-Rail.

Summary of Contents for EMC400

Page 1: ...l Block Power Inputs There are two pairs of power inputs can be used to power up this device The Port Status LEDs LEDs State Indication Steady Power on Power1 Power2 Off Power off Functional Descripti...

Page 2: ...completely seated onto the carrier Carefully slide in the carrier until it is fully and firmly fitted to the power socket Fasten the screws on the carrier Assembly Startup and Dismantling Assembly Pla...