Gigabit SFP Hardened Media Converter
5
Functional Description
y
Meets NEMA TS1/TS2 Environmental requirements: temperature,
shock, and vibration for traffic control equipment.
y
Meets EN61000-6-2 & EN61000-6-3 EMC Generic Standard Immunity
for industrial environment.
y
UL1604 Class 1, Division 2 Classified for use in hazardous locations
(applicable to versions with terminal block power option).
y
DIP switch configuration for link-fault-pass-through, fiber auto/force
mode, and port link down alarm.
y
4096 MAC addresses, 2.75M bits buffer memory.
y
Supports 802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation and
Auto MDI/MDIX.
y
SFP socket for Gigabit fiber optic expansion.
y
Full wire-speed forwarding rate.
y
Alarms for power and port link failure by relay output.
y
Operating voltage and Max. current consumption: 0.88A @ 12VDC,
0.44A @ 24VDC, 0.22A @ 48VDC. Power consumption: 10.5W Max.
y
Power Supply: Redundant DC Terminal Block power inputs or 12VDC
DC JACK with 100-240VAC external power supply.
y
-40 to 75 (
℃
℃
-40
℉
to 167
℉
) operating temperature range.
Tested for functional operation @ -40 to
℃
85 (
℃
-40
℉
to 185
℉
).
y
Supports DIN-Rail, Panel, or Rack Mounting installation.
Assembly, Startup, and Dismantling
y
Assembly: Place the media converter on the DIN rail from above using
the slot. Push the front of the media converter toward the mounting
surface until it audibly snaps into place.
y
Startup: Connect the supply voltage to start up the media converter via
the terminal block (or DC JACK).
y
Dismantling: Pull out the lower edge and then remove the media
converter from the DIN rail.
