10/100Base-TX Hardened Ethernet Extender
1
This quick start guide describes how to install and use the Hardened Ethernet Extender. T
his is the
Hardened Ethernet Extender
of choice for
harsh environments constrained by space.
Physical Description
The Terminal Block and Power inputs
Power Input Assignment
Power1 12VDC
DC
Jack
＋
12-30VDC
Power2
－
Power Ground
＋
12-30VDC
Power3
－
Power Ground
Earth Ground
Terminal Block
DIP Switch Assignment
Loc
The device operates in local mode
Rmt
The device operates in remote mode
•
DC Terminal Block Power Inputs: There are two pairs of power inputs can be used to power up this media converter. Redundant power
supplies function is supported. You only need to have one power input connected to run the media converter.
•
DC JACK Power input: 12VDC.
The 10/100Base-TX and Ethernet Extender Connectors
The 10/100Base-TX Connection
The following lists the pinouts of 10/100Base-TX RJ-45
port.
Pin
Regular Ports
Uplink ports
1
Input Receive Data +
Output Transmit Data +
2
Input Receive Data -
Output Transmit Data -
3
Output Transmit Data +
Input Receive Data +
4 NC
NC
5 NC
NC
6
Output Transmit Data -
Input Receive Data -
7 NC
NC
8 NC
NC
The Ethernet Extender Connection
The RJ-11 and Terminal Block port pinouts
Pin 3: RX, Pin 4: TX.
Use a telephone line to connect two RJ-11 or Terminal Block ports between two
Hardened Ethernet Extenders.
Warning: Impropriate operation might cause the damage of Terminal Block.