Etesia rmcb, User Manual, Page: 19 / 24

19
Most functioning troubles are due to bad uses and / or maintenance of the machine. should breakdown remain, please contact your etesIA
dealer.
Before doing anything, disconnect the spark plug cap and close the fuel valve.
problem origin solution
Machine does not want to start Lack of fuel Fill the tank and open the fuel tap
Spark is full of dust Clean and replace the spark
Too much fuel Remove the spark and dry the engine by
pulling the rocket
Air filter needs cleaning Clean or replace the filter
Irregular operation, strong vibration Cutting blade off centred
Cutting blade loose
Balance or replace it
Tighten the attaching screws
Bad cutting, grassbox does not fill itself
correctly
Blunt blade Sharpened or replace the blade
Blade does not turn on an horizontal plan Replace the blade
Cutting height is too low Lift it slightly
Too quick drive Drive more slowly
Engine run is too low Put the gas lever on [MAXI] position
Grass remains height adjustment too low Lift the cutting height
Cutting deck clogged with grass remains Clean the deck
Blade clutch not working properly Long distance control trouble Adjust the cable tension
Reduce forward speed slot Long distance control trouble Adjust control cables
Does not rest on disengaged position dead point stop needs adjustment Ask your etesIA dealer to adjust dead point
IMPoRtANt
: should you need to replace parts, please use original etesIA ones. It will ensure the longevity of your machine. the use
of any non etesIA part is at user risk and has for consequence the refusal of all warranty claims. etesIA can not be responsible in case of
accident with non etesIA parts.
Page Element Before each cutting After the 5 first
hours
Every 50 h or each
season
Periodically Observation
17 Engine oil Check the level and
adjust
Empty the
frame
Empty the
frame (*)
Necessary to be
able to claim for
warranty
18 Air filter Replace the
cartridge
Clean every 25
hours
18 Spark Clean-adjust
electrodes
Replace if used too
much
Replace every 100
hours
18 Cooling system Cleaning around the
muffler
Check and clean
17 Transmission
forward
Clean and check
tension of the cable
Keep it perfectly
clean
(*) Apply these procedures more frequently if the mower is used in difficult conditions (dust, heat, heavy loads).
10• dAY to dAY MAIntenAnCe – BreAKdoWns And soLUtIons
11• reGULAr MAIntenAnCe sUMMArY